Supply 3230A Crystal Resin Epoxy Resin
| Epoxy resin 3230AB is a two-component epoxy resin hard adhesive with good leveling properties, natural defoaming, resistance to yellowing, ripple, bright surface, and suitable for room temperature or heating curing. Specially used for insulation, moisture-proof sealing, confidentiality sealing, and other electronic parts of large crystal ornaments, river tables, ornaments, drip glue, amber specimen products, and other electronic components. |
Performance Index of Resin Liquids
| Test Items |
Unit |
Test Result |
| Mixing ratio |
- |
A: B=100:33 (weight ratio) |
| Hardening conditions |
- |
25C x 48H or 55C x 8H (100g) |
| Usable time: |
- |
25C × 2H (100g) |
APPLICATION SCENARIO
Epoxy resin
Usage
1. Working environment: Please keep the glue container clean, and strictly follow the standards of 3 for components A and B; 1 weight ratio ratio, accurately weigh the inner wall, mix thoroughly clockwise, and let it stand for 3-5 minutes before use.
2. Adjust the amount of adhesive according to the operating time and dosage to avoid waste. When the temperature is below 15 ºC, please pre adjust the A adhesive to ºC before adjusting it, which is easy to operate (A adhesive will thicken when the temperature is low); After use, it is necessary to seal the barrel lid to avoid scrapping due to moisture absorption products.
3. When the relative humidity is greater than 85%, the surface of the cured material is prone to absorbing moisture from the air, forming a layer of white mist. Therefore, when the humidity is greater than 85%, it is not suitable for room temperature curing. It is recommended to use heated curing.
The above performance data is typical data measured in a laboratory environment with a temperature of 25 ºC and humidity of 70% for reference by users. It cannot guarantee all data that can be achieved in a specific environment. Customers are kindly requested to use the data accurately.
Why Choose Us
Our Advantages
We have strong warehousing capabilities, and large orders can be shipped quickly with short delivery times.
We have multiple forklifts for fast and convenient container loading.
We have a chemical resin production base of 130000 square meters with an annual output of over 400000 tons, so you don't have to worry about shipping time.
The warehouse implements standardized management, with dedicated personnel managing the warehouse and strict packaging and sealing.
Company Profile
Guangdong Chenbao Composite Materials Co. Ltd. was established in 1998 and has focused on the research, development, production and sales of polymer materials and fine chemical materials for many years. The company's headquarters is located in Datang Industrial Park, Datang Town, Sansui District, Foshan City, with beautiful scenery and beautiful environment, and has a production base in Yunfu, Guangdong which is expected to start production in 2021.
The company is equipped with advanced DCS automatic control production equipment and quality control room in the industry, with a total area of over 130, 000 square meters, and an annual output of unsaturated polyester resin, saturated polyester resin, UV light curing resin, acrylic resin and other products more than 400, 000 tons. The company's products are widely used in various fields such as aerospace, communication and navigation, naval vessels, transportation. Infrastructure projects, chemical corrosion protection, civil building materials, textile accessories and so on.
The company pays attention to the introduction of innovative and high-quality talents, and we attach importance to the research and development of new products and new technologies. As a member of China Composite Materials Industry Association, the company has a professional R&D center and product experiment center, and maintains continuous technical cooperation with well-known domestic universities.
In 2018, the company passed the national "high-tech enterprise" certification, successively passed ISO9001: 2015 quality management system certification and ISO14001: 2015 environmental management system certification, and some products have obtained China Classification Society (CCS) certification and global GRS certification. Through the continuous updating of products and technologies, the company provides users with better products, the most professional technical consultation and a full range of services.
"Going far must be self-reliant, pursuing endlessly", the continuous growth of an enterprise is inseparable from the joint efforts of all employees. The company has been adhering to the vision of "creating wealth for the company and realizing value for employees" and completed the shareholding system transformation in 2019. Through the shareholding platform, employees can participate in corporate govermance and share the dividends of corporate development.
People-oriented, technological innovation will be our eternal belief!
FAQ
Q1: I want to find the most suitable resin for my product. Can you achieve customization?
A1: Yes, we will do our best to meet any customer needs. Please contact our customer service to introduce your company's products and requirements. We will first introduce or arrange the parameters that are closest to the product. After you test, we will discuss the specific modification parameters.
Q2: What is the delivery time?
A2: Most of the products in our product list are in stock. If the customer needs to purchase products of original factory specifications, it will be within 1-2 weeks. If you need to arrange special packaging or change product parameters, we will also arrange production and shipment for you as soon as possible.
Q3: Can the price be lower if the order quantity is large?
A3:Of course, the prices on Made in China website are only for reference. Due to the large fluctuations in raw material prices, you need to sign a contract with our sales team before purchasing. Based on your purchase quantity and requirements, we will give you the lowest price.
Q4: What is the shelf life of liquid unsaturated polyester resin?
A4: The storage period of non thixotropic resin at room temperature is 90 days, while the storage period of thixotropic resin at room temperature is 45-60 days.
){kind=link}